When you have damages to the foundation of your home the repair costs can be quite considerable. It really depends on what kind of damage was done and how extensive it is. For example, if you had leaky water pipes inside your home then you may have mold or mildew on your walls. Not only will this increase your chances of getting sick, but the wood interior of your foundation will be rotted away. This means you will have to replace the rotten wood, which is a very expensive process. You may also have cracks in your wooden floors that will need to be repaired as well. However, the most expensive repair work will be if you need to level out your foundation when it is on uneven soil. How does soil get uneven? It all has to do with how well the soil was filled and compacted before your home was constructed on top of it. If the soil was improperly filled then it will cause a portion of the foundation to sink over time. This means a contractor will need to jack up the side of your house and fill in the soil, which is extremely expensive.
Sometimes you could have natural disasters that extensively damage your foundation. Fortunately, you can make certain kinds of repairs that will keep your home from caving in, splitting in half or crashing into the ground on its side. The four methods of repairs are drilled bell piers, helical piers, pressed pilings and steel pairs. Drilled bell piers is a popular foundation repair method where you drill belled shafts that are 11 feet long and then fill them with concrete. After the concrete dries, your home has a new support system to fight against nasty weather. Helical piers are a more expensive repair method, but many contractors will tell you this is the best method. Basically, you have to dig a ditch around your home and then drill a helix plate underneath the foundation. What the helix plate will do is prevent the foundation from moving around due to the high pressures of a windy storm. Pressed Pilings, on the other hand, are more suitable for those on a tight budget. This repair method is only recommended as a temporary repair solution because it does not prevent your foundation from moving.
The way it works is concrete cylinders are placed underneath your home to give it stability. However, cylinders are difficult to place underneath a home because of their size and shape. Therefore, they do not go very deep into the ground to sustain permanent pressure. Finally, the steel piers repair method is great for average consumers that have a little money to spend and want better results than the pressed piling cylinders. The steel piers method involves placing steel pipes underneath the home where they can act as support beams for the structure. The pipes will decrease the movement of the foundation, but it will be subjected to lots of corrosion and rust. In the end, it is always a good idea to ask a contractor about which method is right for you.
It sounds really complex and you might think you need to hire some big national company but that is so far from the truth. The Foundation Pros (foundation repair Massachusetts) are a small company in north eastern US and they have the skills and experience you would expect from one of the large corporations. They provide foundation repair and waterproofing to the communities in Massachusetts, parts of New Hampshire and Rhode Island. You can visit their site for more information at www.foundation-pros.com